Buildex®   One of the world's leading manufacturers and suppliers of self-drilling screws and fasteners.
Corporate Profile Latest News Products New Products Real World Performance Buildex Suport Export Department Contact Buildex
Tapcon® Home > International > Tapcon®
Download this page
Overview
Composite Panel Teks®
Roofing & Cladding Screws
Steel House Framing Screws
WingTeks®
SuperTeks® Series 500
FibreTeks®
Standard Teks®
Stainless Steel
AutoTeks®
Headlok®
PolyZIPS® / Fibreglass Teks®
Tapcon®
Wall Mates®
Sockets & Drive Bits
Washers & Cyclone Plates
Multi-Grip Rivets
Tapcon®

Tapcon fixes directly into pre-drilled holes in concrete and brick, as well as pre-cast panels, lightweight cement blocks, without inserts or chemicals.


Tapcon®
Product Features
 
Blue Climaseal® Blue Climaseal®
   
   
   

Fast installation: drill a hole and drive an anchor.
No inserts are required.
Reversible and removable.
Can be installed close to the edge of concrete.
Thread design results in increased pullout values and lower installation torques.
Climaseal® coating provides extra corrosion resistance.
Recommended for use in ACQ pressure-treated lumber.


How To Use
Drill
Using a hammer drill, drill a hole 1/4” deeper than anchor embedment.
Drill
Slide (optional)
Slide Condrive installation tool over drill bit and drill adapter and
position Tapcon concrete anchor onto tool.
Slide

Drive
Drive Tapcon anchor into pre-drilled hole until anchor is fully seated.

Tapcon anchors require a minimum embedment of 1” and a
maximum embedment of 1-3/4”.

Drive


  Countersunk Head
  For jobs needing a flush finish
eg. brackets, window frames, light fittings, timber.
Countersunk Head
Gauge Length Pack Qty Part Number
4.8mm - 3/16' 1 1/4 (32mm) 100 3169407
  2 1/4 (55mm) 100 3173407
6.4mm - 1/4' 1 1/4 (32mm) 100 3183407
  2 1/4 (55mm) 100 3187407
* All TAPCON boxes of 100 come complete with the required TAPCON drill bit.


  Hexagon Head
  For general fixing to masonry
eg. signs, fences, hose reels.
Hexagon Head
Gauge Length Pack Qty Part Number
4.8mm - 3/16' 1 1/4 (32mm) 100 3139407
  2 1/4 (55mm) 100 3143407
6.4mm - 1/4' 1 1/4 (32mm) 100 3153407
  2 1/4 (55mm) 100 3157407
* All TAPCON boxes of 100 come complete with the required TAPCON drill bit.
Minimum order quantities do apply.


  Technical Specifications
Ultimate Average Pullout Loads
Diameter Embedment 25 mPA concrete 32 mPA concrete Hallow Block Brick
4.8mm 25mm 309 312 276 175
4.8mm 38mm 529 498 383 289
6.4mm 25mm 364 366 391 244
6.4mm 38mm 531 572 494 478


  Mechanical Properties
Single Shear Strength 5050N (4.8mm) 9850N (6.4mm)      
Torsional Strength 7.1Nm (4.8mm) 17.2Nm (6.4mm)      



YOU ARE HERE:
Home > International > Tapcon®
Supply Terms & Conditions

|

Copyright 2017 ITW BUILDEX