Buildex®   One of the world's leading manufacturers and suppliers of self-drilling screws and fasteners.
Corporate Profile Latest News Products New Products Real World Performance Buildex Suport Export Department Contact Buildex
Composite Panel Teks® Home > International > Composite Panel Teks®
Download this page
Overview
Composite Panel Teks®
Roofing & Cladding Screws
Steel House Framing Screws
WingTeks®
SuperTeks® Series 500
FibreTeks®
Standard Teks®
Stainless Steel
AutoTeks®
Headlok®
PolyZIPS® / Fibreglass Teks®
Tapcon®
Wall Mates®
Sockets & Drive Bits
Washers & Cyclone Plates
Multi-Grip Rivets
Self Drilling Teks screws for fitting composite
panels to steel purlins.

How To Use
1. Measure the thickness of materials to be fastened including any air gap.
2. Select the correct size screw for application allowing for adequate thread protrusion.
3. Use correct size driver bit with screwdriver (Teks Gun) set to HIGH speed
(approx 2500 rpm).
4. Push sharply on screwdriver to create a starting point (always check panel manufactures for screw locations before starting).
5. Squeeze screwdriver trigger and maintain firm end pressure until screw has drilled and fastened.
6. Drive screw keeping a firm end pressure on screwdriver until screw is set place, being careful not to damage washer.

Panel Teks®
Product Features
 
Buildex® Warranty
Climaseal® 3
(AS3566 Class 3)
ShankGuard®
HiGrip®

  Hex Head Stitching Screw with 16mm Steel Bonded Washer C3
  Reduced Drill Point Max drill capacity 2mm.
Hex Head Stitching Screw with 16mm Steel Bonded Washer C3
Gauge T.P.I Length Pack / Carton Qty Pallet Qty Part Number Product Features
4.8mm / 10g 16 20 1000 / 3 144,000 6-310-0650-1CS
Buildex Warranty Climaseal® 3    


  Hex Head with 19mm Steel Bonded Washer C3
Hex Head with 19mm Steel Bonded Washer C3
Gauge T.P.I Length Pack / Carton Qty Pallet Qty Part Number Product Features
5.5mm / 12g 14 45 500 52,500 6-310-0638-8CS
Buildex Warranty Climaseal® 3 ShankGuard®  
  14 78 500 42,000 6-310-0640-0CS
Buildex Warranty Climaseal® 3 ShankGuard® HiGrip®
  14 103 300 25,200 6-310-0641-1CS
Buildex Warranty Climaseal® 3 ShankGuard® HiGrip®
  14 125 250 21,000 6-310-0642-2CS
Buildex Warranty Climaseal® 3 ShankGuard® HiGrip®
  14 135 250 21,000 6-310-0653-3CS
Buildex Warranty Climaseal® 3 ShankGuard® HiGrip®
Painted head colours Head painted colours on request minimum order quantity will apply

  Technical Specifications (kN = Kilo Newtons, nM = Newton Metres)
Screw Gauge T.P.I Single Shear (kN) Axial Tensile (kN) Torsional Strength (Nm)
4.8mm / 10g 16 6.8 11.9 8.4
5.5mm / 12g 16 7.5 14.5 11.6

Values given are averages obtained under laboratory conditions.
Appropriate safety factors should be applied for design purposes.



YOU ARE HERE:
Home > International > Composite Panel Teks®
Supply Terms & Conditions

|

Copyright 2017 ITW BUILDEX