Buildex®   One of the world's leading manufacturers and suppliers of self-drilling screws and fasteners.
Corporate Profile Latest News Products New Products Real World Performance Buildex Suport Export Department Contact Buildex
PolyZIPS® /Fibreglass Home > International > PolyZIPS® / Fibreglass TEKS®
Download this page
Overview
Composite Panel Teks®
Roofing & Cladding Screws
Steel House Framing Screws
WingTeks®
SuperTeks® Series 500
FibreTeks®
Standard Teks®
Stainless Steel
AutoTeks®
Headlok®
PolyZIPS® / Fibreglass Teks®
Tapcon®
Wall Mates®
Sockets & Drive Bits
Washers & Cyclone Plates
Multi-Grip Rivets
PolyZIPS® PolyTEK® Fibreglass TEKS®


For fixing Fibreglass to steel purlins and Polycarbonate sheeting to steel purlins and timber battens. Saving 50% of installation time with a new patented Winged cutting feature.

No pre drilling required

Product Features
 
Buildex® Warranty
Climaseal® 3
(AS3566 Class 3)
   
   

Features
New 26mm EPDM soft set washer specifically designed for use on Polycarbonate sheeting with an inner sealing ring to prevent water entry. EPDM is an Industry approved material for Polycarbonate.

Industry approved Weatherlok® washers. (Fibreglass Teks only)

Patent pending wing design drills an over sized hole into the fibreglass material - eliminates sheet buckling and water entry due to expansion in high temperatures.

M6.5 (14g) screw with a 5/16’ drive head for ease of installation.


PolyZIPS®

  PolyZIPS® Hex Head C3 with 26mm EPDM Seal
  For fixing Polycarbonate sheeting with a crest height of 15 – 30mm
into Timber and 15 – 24mm into Steel up to 1.6mm thick.

Click to view video



PolyZIPS® Hex Head C3 with 26mm EPDM Seal
Gauge T.P.I Length Pack / Carton Qty Pallet Qty Part Number Product Features
6.5mm / 14g 14 50 500 13,500 6-030-0316-6CS
Buildex Warranty Climaseal® 3    

PolyTEK®

  PolyTeks® Hex Head C3 with 26mm EPDM Seal
  For fixing Polycarbonate sheeting with a crest height
of 15 – 42mm into Steel up to 5.0mm thick.
PolyTeks® Hex Head C3 with 26mm EPDM Seal
Gauge T.P.I Length Pack / Carton Qty Pallet Qty Part Number Product Features
6.5mm / 14g 14 65 500 13,500 Made to Order
Buildex Warranty Climaseal® 3    



FibreGlass TEKS®


How to Use

Step 1 Step 1

Insert Fibreglass-Teks® into 5/16 socket and firmly position screw in centre of sheet crest* to prevent any skidding or scratching.

* Suitable for roofing profile heights 18mm to 29mm (M6.5x65mm) & 40mm to 62.5mm (M6.5x85mm)
Step 2 Step 2

Using a variable speed screw gun, start drilling slowly keeping screw straight to give you the correct oversized hole in your fibreglass material.
Step 3 Step 3

Keep driving screw until it engages into steel purlin* and Weatherlok® washer sits securely.
Do not over tighten screw.

*Suitable for purlins 1.2mm to 5.0mm thick


  FibreGlass Teks® Hex Head C3 with 32mm Weatherlok Washer
 

For fixing Fibreglass sheeting with a crest height of
15 – 42mm / 65mm screw and 15 – 59mm / 85mm
screw into Steel up to 5.0mm thick.

Click to view video

FibreGlass Teks® Hex Head C3 with 32mm Weatherlok Washer

Gauge T.P.I Length Pack / Carton Qty Pallet Qty Part Number Product Features
6.5mm / 14g 14 65 500 13,500 6-310-0607-7CS
Buildex Warranty Climaseal® 3    
  14 85 250 16,000 6-310-0626-6CS
Buildex Warranty Climaseal® 3    


  Technical Specifications (kN = Kilo Newtons, nM = Newton Metres)
Screw Gauge T.P.I Single Shear (kN) Axial Tensile (kN) Torsional Strength (Nm)
M6.5mm / 14g 14 11.1 20.5 19.6


YOU ARE HERE:
Home > International > PolyZIPS® / Fibreglass TEKS®
Supply Terms & Conditions

|

Copyright 2017 ITW BUILDEX